Gear for the Re-enactor
 Hand hammered 13 gage steel shield boss $45 |
 Rawhide shield face. 3o in. $70 SOLD OUT/ 36 in. $130
|
 Steel brackets $24 pair Hardwood hand carved handle $22 |
|
Shield hardware, sold in kits.
|
Steel cut nail with a dark, powder gray finish which can be clinched; not a hardened nail. These nails have blunt points to reduce wood splits, and the cut nail shank holds tight. Length: 2'' Size: 6d Washer/Rivets plates about 3/4X1/2 inch (hand cut so size and thickness varies slightly). Zinc plated steel. You can remove the zinc as those pictured. Brass Cap nuts, 3/16
|
Carriage bolts, Zinc plated steel, 3/16 Diameter, 3/4 or 1 inch in length . 6 rivet plates, 10 Nails $6.00 10 bolt/cap set $4.oo (specify size)
|
|
1/4 inch Rawhide lace. |
3 inch wide rawhide strips. Enough to wrap a 32 inch shield. |
 Viking hand ax Throwing or Bearded $52 |
 Practical Viking Sword $98 Measurements |
 Long/Leaf spear head, antiqued $41
Hand Hammered Spear Head $40 Fits ash pole below. |
Ash Spear Poles 1 1/8 inch Diameter
6 ft. $12
8 ft. $17
10 ft. $22
Add $15 for a tapered end.
| Please note: Shipping on spear poles is more expensive than the
shafts themselves. As such the best deal I can work out is: 5 poles, 6ft. including shipping=$80 5 poles, 8ft. including shipping=$105 5 poles, 10ft. including shipping=$130 (with fuel surcharges right now this can change +/- 10%) |
